top of page
OnHim Standing Calf Raise (New)
The Ultimate 3D Calf Builder. Full Range. Full Control. The Most Adjustable Calf Raise Ever Engineered—Now with Integrated Split-Squat Functionality.
The OnHim Standing Calf Raise (New) is built to deliver unmatched precision and power for the calves, with advanced adjustability that allows the machine to fit athletes of nearly all heights (from about 4’0” to 6’6”) without compromising biomechanics. Every component—foot platform, shoulder pads, height settings, and accessory stand—is engineered to increase muscle recruitment, eliminate instability, and unlock deeper, safer ranges of motion for both bilateral and unilateral training.
Designed not only as a premium calf raise station but also as a fully integrated single-leg Bulgarian split squat platform, this hybrid system expands the exercise library while preserving the strength, stability, and durability Newtech equipment is known for. The result is a machine that trains calves, quads, glutes, and hamstrings through precise joint angles and advanced load distribution.
Key Features
16 Micro Height Adjustments for Perfect Alignment
A height range that accommodates users from 4 ft to 6 ft 6 in with ease.
Micro-increments ensure that every athlete can position the shoulder pads exactly where needed—eliminating unnecessary spinal loading and maintaining optimal ankle dorsiflexion mechanics.
This precise customization results in cleaner reps, deeper stretches, and more effective peak contractions.
Dual-Purpose Training Station
1. Premium Standing Calf Raise
The foot platform features:
A rounded, grip-textured forefoot roller allowing the athlete to position the ball of the foot securely for maximum dorsiflexion and peak contraction.
A flat, diamond-textured heel platform for added stability, full grounding, and anti-slip performance.
This design enhances:
Deep stretch in the gastrocnemius and soleus
Full ankle range for hypertrophy
Zero slip or rollout during heavy loading
2. Integrated Single-Leg Squat Stand
Included accessory stand is fully adjustable and locks into place for:
Unilateral Bulgarian split squats
Quad-biased or glute-biased variations
The padded rear-leg support provides comfortable placement behind the ankle, allowing deeper hip flexion without losing balance or joint alignment.
This increases glute activation, improves hip mobility, and reduces shear stress on the knee during split squat patterns.
8-Position Slider for Angle & Foot Position Customization
The lower platform includes an 8-position sliding rail that allows you to modify:
The angle of the calf raise (greater incline → more stretch & soleus recruitment)
The forward foot distance during split squats (farther → more glute bias; closer → more quad emphasis)
Biomechanical Benefits:
A steeper angle increases dorsiflexion demands, improving calf stretch-mediated hypertrophy.
A neutral angle can be used for higher-rep pump training with reduced tendon stress.
Adjusting front foot position during split squats allows you to isolate:
Quads with a more upright torso and closer stance
Glutes/Hamstrings with a longer stance and hip hinge pattern
This makes the machine extremely versatile for strength athletes and physique development.
Advanced Shoulder Pad & Frame Design
Comfortable yet firm pads stabilize the upper body during heavy calf raises.
Handles are precisely angled to maintain neutral wrist position and reduce fatigue in the forearms.
The structure ensures that the load travels cleanly through the ankle and not the lower back.
Commercial-Grade Durability
Heavy-duty steel frame built to withstand high-volume commercial gym use.
Reinforced pivot points offer long-term structural integrity with minimal maintenance.
Smooth pulley system ensures even resistance across the entire range of motion.
Weight Stack
125 kg commercial stack (Customizable options available upon request for advanced athletes or specialization needs).
No. OH-SCR
Size: W785 × L1950 × H1700 (mm)
The OnHim Standing Calf Raise (New) is built to deliver unmatched precision and power for the calves, with advanced adjustability that allows the machine to fit athletes of nearly all heights (from about 4’0” to 6’6”) without compromising biomechanics. Every component—foot platform, shoulder pads, height settings, and accessory stand—is engineered to increase muscle recruitment, eliminate instability, and unlock deeper, safer ranges of motion for both bilateral and unilateral training.
Designed not only as a premium calf raise station but also as a fully integrated single-leg Bulgarian split squat platform, this hybrid system expands the exercise library while preserving the strength, stability, and durability Newtech equipment is known for. The result is a machine that trains calves, quads, glutes, and hamstrings through precise joint angles and advanced load distribution.
Key Features
16 Micro Height Adjustments for Perfect Alignment
A height range that accommodates users from 4 ft to 6 ft 6 in with ease.
Micro-increments ensure that every athlete can position the shoulder pads exactly where needed—eliminating unnecessary spinal loading and maintaining optimal ankle dorsiflexion mechanics.
This precise customization results in cleaner reps, deeper stretches, and more effective peak contractions.
Dual-Purpose Training Station
1. Premium Standing Calf Raise
The foot platform features:
A rounded, grip-textured forefoot roller allowing the athlete to position the ball of the foot securely for maximum dorsiflexion and peak contraction.
A flat, diamond-textured heel platform for added stability, full grounding, and anti-slip performance.
This design enhances:
Deep stretch in the gastrocnemius and soleus
Full ankle range for hypertrophy
Zero slip or rollout during heavy loading
2. Integrated Single-Leg Squat Stand
Included accessory stand is fully adjustable and locks into place for:
Unilateral Bulgarian split squats
Quad-biased or glute-biased variations
The padded rear-leg support provides comfortable placement behind the ankle, allowing deeper hip flexion without losing balance or joint alignment.
This increases glute activation, improves hip mobility, and reduces shear stress on the knee during split squat patterns.
8-Position Slider for Angle & Foot Position Customization
The lower platform includes an 8-position sliding rail that allows you to modify:
The angle of the calf raise (greater incline → more stretch & soleus recruitment)
The forward foot distance during split squats (farther → more glute bias; closer → more quad emphasis)
Biomechanical Benefits:
A steeper angle increases dorsiflexion demands, improving calf stretch-mediated hypertrophy.
A neutral angle can be used for higher-rep pump training with reduced tendon stress.
Adjusting front foot position during split squats allows you to isolate:
Quads with a more upright torso and closer stance
Glutes/Hamstrings with a longer stance and hip hinge pattern
This makes the machine extremely versatile for strength athletes and physique development.
Advanced Shoulder Pad & Frame Design
Comfortable yet firm pads stabilize the upper body during heavy calf raises.
Handles are precisely angled to maintain neutral wrist position and reduce fatigue in the forearms.
The structure ensures that the load travels cleanly through the ankle and not the lower back.
Commercial-Grade Durability
Heavy-duty steel frame built to withstand high-volume commercial gym use.
Reinforced pivot points offer long-term structural integrity with minimal maintenance.
Smooth pulley system ensures even resistance across the entire range of motion.
Weight Stack
125 kg commercial stack (Customizable options available upon request for advanced athletes or specialization needs).
No. OH-SCR
Size: W785 × L1950 × H1700 (mm)
OnHim Seated Leg Curl (New)
Premium Isolation. Precision Engineering. Built for Serious Hamstring Development.
The OnHim Seated Leg Curl is engineered to deliver unmatched hamstring isolation with zero compromise in biomechanics, stability, or user fit. Every adjustment point has been designed far beyond industry norms, ensuring that athletes of all sizes can lock into the machine with perfect alignment and generate maximum tension through the full range of motion.
This model eliminates the common weaknesses found in traditional seated leg curls—seat sliding, unstable positioning, limited pad adjustability, bent lever arms, and inconsistent load curves—while offering the durability and smoothness Newtech is known for.
Whether outfitting a professional facility or a private high-performance training room, this machine guarantees a premium experience for strength athletes, physique competitors, and everyday users alike.
Key Features
Industry-Leading Adjustability for Perfect Alignment
12-Position Upper Thigh Pad (double the industry standard):
Provides micro-adjustability so users never feel “in-between” settings. Locks the femur firmly in place, maximizing hamstring recruitment and eliminating unnecessary hip movement.
8-Position Backrest Angle Adjustment:
Enables athletes to fine-tune torso alignment for optimal pelvic position and peak contraction.
8-Position Fore–Aft Seat Slide:
Allows the entire seat to glide forward or backward for precise hip-to-knee alignment, ensuring every user—short or tall—can set up perfectly.
Fully Adjustable Ankle Positioning
Multi-Rotation Ankle Pad on Slider Rail:
Twists and moves along a numbered slider to match every shin length, ankle position, and foot angle, ensuring a comfortable but locked-in curl movement.
Enhanced Stability and Power Output
Integrated Seatbelt:
Anchors the athlete’s hips to the pad, preventing the pelvis from lifting during heavy or high-rep sets. This eliminates momentum, forces pure knee flexion, and dramatically increases hamstring activation.
Reinforced Curl Arm Support Bar:
The curling lever is equipped with a secondary reinforcement bar to prevent long-term bending or flex—far surpassing typical commercial leg curl durability.
Smooth Resistance & Long-Term Reliability
Advanced Cam-Driven Load Curve:
Designed to match the natural strength profile of the hamstrings, maintaining tension throughout the entire movement.
Commercial-Grade Construction:
Heavy-duty steel frame, oversized pivot points, and anti-corrosion hardware for years of performance in high-traffic facilities.
Weight Stack
125 kg Weight Stack (customizable):
Perfect for athletes who train with progressive overload or heavy concentric work. Optional custom stack upgrades available for facilities needing more resistance.
Product Code: T-OH-SLC
Size: W1200 × L1600 × H1610 (mm)
The OnHim Seated Leg Curl is engineered to deliver unmatched hamstring isolation with zero compromise in biomechanics, stability, or user fit. Every adjustment point has been designed far beyond industry norms, ensuring that athletes of all sizes can lock into the machine with perfect alignment and generate maximum tension through the full range of motion.
This model eliminates the common weaknesses found in traditional seated leg curls—seat sliding, unstable positioning, limited pad adjustability, bent lever arms, and inconsistent load curves—while offering the durability and smoothness Newtech is known for.
Whether outfitting a professional facility or a private high-performance training room, this machine guarantees a premium experience for strength athletes, physique competitors, and everyday users alike.
Key Features
Industry-Leading Adjustability for Perfect Alignment
12-Position Upper Thigh Pad (double the industry standard):
Provides micro-adjustability so users never feel “in-between” settings. Locks the femur firmly in place, maximizing hamstring recruitment and eliminating unnecessary hip movement.
8-Position Backrest Angle Adjustment:
Enables athletes to fine-tune torso alignment for optimal pelvic position and peak contraction.
8-Position Fore–Aft Seat Slide:
Allows the entire seat to glide forward or backward for precise hip-to-knee alignment, ensuring every user—short or tall—can set up perfectly.
Fully Adjustable Ankle Positioning
Multi-Rotation Ankle Pad on Slider Rail:
Twists and moves along a numbered slider to match every shin length, ankle position, and foot angle, ensuring a comfortable but locked-in curl movement.
Enhanced Stability and Power Output
Integrated Seatbelt:
Anchors the athlete’s hips to the pad, preventing the pelvis from lifting during heavy or high-rep sets. This eliminates momentum, forces pure knee flexion, and dramatically increases hamstring activation.
Reinforced Curl Arm Support Bar:
The curling lever is equipped with a secondary reinforcement bar to prevent long-term bending or flex—far surpassing typical commercial leg curl durability.
Smooth Resistance & Long-Term Reliability
Advanced Cam-Driven Load Curve:
Designed to match the natural strength profile of the hamstrings, maintaining tension throughout the entire movement.
Commercial-Grade Construction:
Heavy-duty steel frame, oversized pivot points, and anti-corrosion hardware for years of performance in high-traffic facilities.
Weight Stack
125 kg Weight Stack (customizable):
Perfect for athletes who train with progressive overload or heavy concentric work. Optional custom stack upgrades available for facilities needing more resistance.
Product Code: T-OH-SLC
Size: W1200 × L1600 × H1610 (mm)
OnHim Seated Leg Press (Thomson)
Model Code: No. OH-SLP
Size: W1180 × L2070 × H1830 (mm)
Weight Block: 150KG
Frame: 100 x 50 3.2T
FEATURES:
1. Effective for developing quadriceps, glutes, and hamstrings as a representative lower body exercise equipment in Weight Training.
2. Designed with ergonomic principles to minimize joint strain and apply appropriate resistance.
Size: W1180 × L2070 × H1830 (mm)
Weight Block: 150KG
Frame: 100 x 50 3.2T
FEATURES:
1. Effective for developing quadriceps, glutes, and hamstrings as a representative lower body exercise equipment in Weight Training.
2. Designed with ergonomic principles to minimize joint strain and apply appropriate resistance.
OnHim Multi Low Cable (NEW)
No. OH-VR
Size: W1106 × L1818 × H2121 (mm)
Size: W1106 × L1818 × H2121 (mm)
OnHim Reverse Hyper (New)
Total Posterior Chain Control — Without Compromise.
The OnHim Reverse Hyper is a purpose-built posterior chain machine engineered to deliver maximum glute and hamstring activation, controlled spinal decompression, and unmatched adjustability — without the compromises found in traditional reverse hyper designs.
Built around Newtech’s reinforced structural frame and precision adjustment system, this machine allows athletes to fine-tune torso angle, hand height, ankle position, and range of motion to match their biomechanics — not force their body into a one-size-fits-all movement pattern.
Intelligent Biomechanics — Explained Clearly
The adjustable torso and arm positioning is where the OnHim Reverse Hyper truly separates itself:
Higher torso / arm setting (parallel to the floor)
Emphasizes glute contraction at the top, increases hip extension dominance, and reduces excessive lumbar movement — ideal for glute growth, power athletes, and controlled hypertrophy work.
Lower torso / arm setting (angled downward)
Creates a deeper stretch at the bottom, increasing hamstring length under load and enhancing posterior chain elasticity — ideal for lifters prioritizing stretch-mediated hypertrophy, athletic carryover, or mobility under tension.
This dual-angle system allows one machine to serve bodybuilders, strength athletes, and rehab-focused training alike.
Key Features & Engineering Highlights
7 adjustable ankle pad positions
Dial in exact leg length and swing arc for consistent tension through the entire movement.
10 torso & hand elevation settings
Adjust hand height and torso angle from ~30° downward to fully parallel for customized biomechanics and targeted stimulus.
Sliding handle system
Twist-adjust mechanism allows handles to move closer or farther to match arm length and torso depth — improving stability and bracing.
Hydraulic assist adjustment system
Smooth, effortless changes between settings without strain or downtime.
Reinforced swing arm bar
Overbuilt to prevent flexing or bending — extending machine lifespan well beyond industry standards.
100 kg adjustable weight stack
Delivers consistent cable tension with smooth resistance throughout the full range of motion.
Textured single-leg foot platform
Enables unilateral work and advanced targeting:
Toe inward → increased outer glute bias
Toe outward → increased hamstring & glute med activation
Maximum glute contraction with controlled spinal loading
Promotes powerful hip extension while minimizing unnecessary stress on the lower back.
Training Applications
Glute hypertrophy & shaping
Hamstring development (especially upper hamstrings)
Posterior chain strength & power
Athletic carryover for sprinting, jumping, and deadlifting
Controlled spinal decompression under load
Unilateral glute & hamstring correction work
Who This Machine Is For
High-end commercial gyms
Bodybuilding-focused facilities
Performance training centers
Athletes who demand precision, not gimmicks
Anyone serious about building a real posterior chain
No. OH-RH
Size: W1182 × L1290 × H1631 (mm)
The OnHim Reverse Hyper is a purpose-built posterior chain machine engineered to deliver maximum glute and hamstring activation, controlled spinal decompression, and unmatched adjustability — without the compromises found in traditional reverse hyper designs.
Built around Newtech’s reinforced structural frame and precision adjustment system, this machine allows athletes to fine-tune torso angle, hand height, ankle position, and range of motion to match their biomechanics — not force their body into a one-size-fits-all movement pattern.
Intelligent Biomechanics — Explained Clearly
The adjustable torso and arm positioning is where the OnHim Reverse Hyper truly separates itself:
Higher torso / arm setting (parallel to the floor)
Emphasizes glute contraction at the top, increases hip extension dominance, and reduces excessive lumbar movement — ideal for glute growth, power athletes, and controlled hypertrophy work.
Lower torso / arm setting (angled downward)
Creates a deeper stretch at the bottom, increasing hamstring length under load and enhancing posterior chain elasticity — ideal for lifters prioritizing stretch-mediated hypertrophy, athletic carryover, or mobility under tension.
This dual-angle system allows one machine to serve bodybuilders, strength athletes, and rehab-focused training alike.
Key Features & Engineering Highlights
7 adjustable ankle pad positions
Dial in exact leg length and swing arc for consistent tension through the entire movement.
10 torso & hand elevation settings
Adjust hand height and torso angle from ~30° downward to fully parallel for customized biomechanics and targeted stimulus.
Sliding handle system
Twist-adjust mechanism allows handles to move closer or farther to match arm length and torso depth — improving stability and bracing.
Hydraulic assist adjustment system
Smooth, effortless changes between settings without strain or downtime.
Reinforced swing arm bar
Overbuilt to prevent flexing or bending — extending machine lifespan well beyond industry standards.
100 kg adjustable weight stack
Delivers consistent cable tension with smooth resistance throughout the full range of motion.
Textured single-leg foot platform
Enables unilateral work and advanced targeting:
Toe inward → increased outer glute bias
Toe outward → increased hamstring & glute med activation
Maximum glute contraction with controlled spinal loading
Promotes powerful hip extension while minimizing unnecessary stress on the lower back.
Training Applications
Glute hypertrophy & shaping
Hamstring development (especially upper hamstrings)
Posterior chain strength & power
Athletic carryover for sprinting, jumping, and deadlifting
Controlled spinal decompression under load
Unilateral glute & hamstring correction work
Who This Machine Is For
High-end commercial gyms
Bodybuilding-focused facilities
Performance training centers
Athletes who demand precision, not gimmicks
Anyone serious about building a real posterior chain
No. OH-RH
Size: W1182 × L1290 × H1631 (mm)
OnHim Leg Extension
Model Code: No. OH-LE
Size: W1190 × L1370 × H1630 (mm)
Weight Block: 125 KG
Frame: 100 x 50 3.2T (Circular)
FEATURES:
1. Effective for developing quad muscles as a basic lower body exercise device.
2. Alleviate physical constraints by applying knee and ankle support angle adjustment technology
3. Relieve physical constraints by applying backrest distance, angle, and height adjustment technology
4. Apply a body support belt to enable fixed exercise performance.
5. Handles are installed on both sides of the seat to allow for exercise in a stable posture.
6. Ergonomic design to ensure no strain on joints and appropriate load.
Size: W1190 × L1370 × H1630 (mm)
Weight Block: 125 KG
Frame: 100 x 50 3.2T (Circular)
FEATURES:
1. Effective for developing quad muscles as a basic lower body exercise device.
2. Alleviate physical constraints by applying knee and ankle support angle adjustment technology
3. Relieve physical constraints by applying backrest distance, angle, and height adjustment technology
4. Apply a body support belt to enable fixed exercise performance.
5. Handles are installed on both sides of the seat to allow for exercise in a stable posture.
6. Ergonomic design to ensure no strain on joints and appropriate load.
OnHim Leg Curl
Model Code: No. OH-LC
Size: W930 × L1625 × H1630 (mm)
Weight Block: 100 KG
Frame: 100 x 50 3.2T
FEATURES:
1. Effective for developing the hamstrings as a fundamental lower body exercise equipment in Weight Training.
2. Enables stable posture during exercise with handle installation.
3. Designed ergonomically to avoid strain on joints and ensure appropriate resistance.
4. Application of ankle pad, operating unit angle, and handle support height adjustment technologies to alleviate physical constraints.
Size: W930 × L1625 × H1630 (mm)
Weight Block: 100 KG
Frame: 100 x 50 3.2T
FEATURES:
1. Effective for developing the hamstrings as a fundamental lower body exercise equipment in Weight Training.
2. Enables stable posture during exercise with handle installation.
3. Designed ergonomically to avoid strain on joints and ensure appropriate resistance.
4. Application of ankle pad, operating unit angle, and handle support height adjustment technologies to alleviate physical constraints.
OnHim Kneeling Hip Raise
Glute Kickbacks, Reinvented.
The Newtech OnHim Kneeling Hip Raise is a posterior-chain isolation system engineered to target the glutes and upper hamstrings with unmatched precision and stability. Unlike traditional low-pulley kickback stations, this machine is built around a fully supported kneeling or standing platform that eliminates balance issues, reduces compensations, and delivers continuous tension throughout the entire range of motion. Its patented cable-slack mechanism, multi-position knee pads, and four-handle stabilization system elevate posterior-chain training into a controlled, repeatable, hypertrophy-optimized experience.
With a 125 kg weight stack, reinforced frame architecture, and highly intuitive pad and cable adjustments, the Kneeling Hip Raise is ideal for athletes and physique-focused lifters seeking maximal glute and hamstring recruitment without spinal loading or awkward positioning. This unit replaces the need for conventional cable tower kickbacks, offering a dedicated posterior-chain station that is safer, smoother, and more biomechanically correct.
Patented Cable-Slack Mechanism – Industry First
At the heart of this machine is Newtech’s patented tension-control lever located on the rear-right side of the unit. This innovation completely changes how ankle-cuff cable exercises are set up:
Pull the lever toward you → Cable loosens and creates slack, making it extremely easy to attach the Newtech ankle cuff without crouching near the pulley or wrestling with tension.
Once the ankle cuff is secured and the user is in proper position, push the lever forward → The mechanism locks in place and automatically removes slack, producing immediate, full-range tension from the first rep.
This system eliminates the awkward, injury-prone setup process found on standard low-pulley machines and ensures a consistent starting stretch at the glutes and hamstrings every time.
Multi-Position Knee Pads – Adjustable and Convertible
The dual kneeling pads offer a secure and comfortable base for loaded hip extension. Each pad:
Clicks upward into a fixed, locked position
Clicks downward completely out of the way
This versatility allows:
Single-leg kneeling kickbacks
Single-leg standing kickbacks (with the knee pad down)
Sideways standing work for abductions and adductor-focused patterns
Forward-facing or angled positions depending on the lifter’s biomechanics
The pad design ensures users with any limb length or hip width can find a stable and repeatable training position.
Four-Handle Stabilization System + Bracing Pad
The machine includes four strategically placed handles to maximize control and allow users to brace in multiple orientations:
Underhand
Neutral
Wide or narrow control points
High or low anchoring positions
A large chest/torso pad provides an additional bracing surface so the user can stabilize the spine and pelvis, increasing glute activation while reducing unwanted trunk swing.
Included Newtech Ankle Cuffs
Each unit comes with Newtech’s commercial-grade ankle cuffs designed for comfort, secure fit, and precise cable tracking.
The ankle cuff attaches seamlessly using the patented slack lever, enabling a faster setup process and more effective engagement of the gluteus maximus, upper hamstring tie-in, and posterior-lateral hip musculature.
Posterior Chain Focus – Glutes, Hamstrings, Upper Hamstring
The primary movement pattern is the kneeling hip raise / hip extension, which maximizes:
Gluteus maximus contraction
Upper-hamstring tie-in
End-range hip extension strength
Controlled eccentric loading
Because the cable remains tensioned throughout, the glutes never lose load—far superior to free-motion or unsupported kickbacks.
Expanded Movement Capabilities
In addition to glute kickbacks, the machine supports:
Hip Abductions (Side Glutes)
Stand or kneel sideways to the unit to drive the leg outward.
The cable path allows full lateral travel without torqueing the knee.
Hip Adductions (Inner Thigh)
Stand with the inside leg attached to the cuff and cross fully across the body’s midline—something traditional seated adductor machines cannot accomplish due to limited travel.
Standing Hip Extensions with Bracing
Repeatable, supported standing kickbacks with no balance limitations.
Kneeling Single-Leg Variations
For stricter glute targeting and reduced lumbar involvement.
This versatility makes the unit extremely valuable for glute-focused training, athletic posterior-chain development, and rehab environments that require controlled joint mechanics.
Foot Platforms & Pad Geometry
The oversized diamond-plate foot platforms ensure:
Stable grounding
Angled positioning for optimal glute line-of-pull
Secure traction even under heavy tension
The interplay between pad angle, foot placement, and cable path creates a highly ergonomic setup for all hip structures.
Convenience & Storage
Hooks on both sides of the machine allow for clean storage of cuffs and accessories
Central cable routing keeps the training area tidy and reduces trip hazards
Industrial-grade bearings and pulleys create a smooth feel throughout the entire range
Ideal For:
Bodybuilding and glute-focused development
Strength and posterior-chain athletes
High-end commercial gyms
Women’s training areas and glute-specialty sections
Rehab clinics requiring controlled hip isolation work
N. OH-KHR
Size: W1145 × L1554 × H1631 (mm)
The Newtech OnHim Kneeling Hip Raise is a posterior-chain isolation system engineered to target the glutes and upper hamstrings with unmatched precision and stability. Unlike traditional low-pulley kickback stations, this machine is built around a fully supported kneeling or standing platform that eliminates balance issues, reduces compensations, and delivers continuous tension throughout the entire range of motion. Its patented cable-slack mechanism, multi-position knee pads, and four-handle stabilization system elevate posterior-chain training into a controlled, repeatable, hypertrophy-optimized experience.
With a 125 kg weight stack, reinforced frame architecture, and highly intuitive pad and cable adjustments, the Kneeling Hip Raise is ideal for athletes and physique-focused lifters seeking maximal glute and hamstring recruitment without spinal loading or awkward positioning. This unit replaces the need for conventional cable tower kickbacks, offering a dedicated posterior-chain station that is safer, smoother, and more biomechanically correct.
Patented Cable-Slack Mechanism – Industry First
At the heart of this machine is Newtech’s patented tension-control lever located on the rear-right side of the unit. This innovation completely changes how ankle-cuff cable exercises are set up:
Pull the lever toward you → Cable loosens and creates slack, making it extremely easy to attach the Newtech ankle cuff without crouching near the pulley or wrestling with tension.
Once the ankle cuff is secured and the user is in proper position, push the lever forward → The mechanism locks in place and automatically removes slack, producing immediate, full-range tension from the first rep.
This system eliminates the awkward, injury-prone setup process found on standard low-pulley machines and ensures a consistent starting stretch at the glutes and hamstrings every time.
Multi-Position Knee Pads – Adjustable and Convertible
The dual kneeling pads offer a secure and comfortable base for loaded hip extension. Each pad:
Clicks upward into a fixed, locked position
Clicks downward completely out of the way
This versatility allows:
Single-leg kneeling kickbacks
Single-leg standing kickbacks (with the knee pad down)
Sideways standing work for abductions and adductor-focused patterns
Forward-facing or angled positions depending on the lifter’s biomechanics
The pad design ensures users with any limb length or hip width can find a stable and repeatable training position.
Four-Handle Stabilization System + Bracing Pad
The machine includes four strategically placed handles to maximize control and allow users to brace in multiple orientations:
Underhand
Neutral
Wide or narrow control points
High or low anchoring positions
A large chest/torso pad provides an additional bracing surface so the user can stabilize the spine and pelvis, increasing glute activation while reducing unwanted trunk swing.
Included Newtech Ankle Cuffs
Each unit comes with Newtech’s commercial-grade ankle cuffs designed for comfort, secure fit, and precise cable tracking.
The ankle cuff attaches seamlessly using the patented slack lever, enabling a faster setup process and more effective engagement of the gluteus maximus, upper hamstring tie-in, and posterior-lateral hip musculature.
Posterior Chain Focus – Glutes, Hamstrings, Upper Hamstring
The primary movement pattern is the kneeling hip raise / hip extension, which maximizes:
Gluteus maximus contraction
Upper-hamstring tie-in
End-range hip extension strength
Controlled eccentric loading
Because the cable remains tensioned throughout, the glutes never lose load—far superior to free-motion or unsupported kickbacks.
Expanded Movement Capabilities
In addition to glute kickbacks, the machine supports:
Hip Abductions (Side Glutes)
Stand or kneel sideways to the unit to drive the leg outward.
The cable path allows full lateral travel without torqueing the knee.
Hip Adductions (Inner Thigh)
Stand with the inside leg attached to the cuff and cross fully across the body’s midline—something traditional seated adductor machines cannot accomplish due to limited travel.
Standing Hip Extensions with Bracing
Repeatable, supported standing kickbacks with no balance limitations.
Kneeling Single-Leg Variations
For stricter glute targeting and reduced lumbar involvement.
This versatility makes the unit extremely valuable for glute-focused training, athletic posterior-chain development, and rehab environments that require controlled joint mechanics.
Foot Platforms & Pad Geometry
The oversized diamond-plate foot platforms ensure:
Stable grounding
Angled positioning for optimal glute line-of-pull
Secure traction even under heavy tension
The interplay between pad angle, foot placement, and cable path creates a highly ergonomic setup for all hip structures.
Convenience & Storage
Hooks on both sides of the machine allow for clean storage of cuffs and accessories
Central cable routing keeps the training area tidy and reduces trip hazards
Industrial-grade bearings and pulleys create a smooth feel throughout the entire range
Ideal For:
Bodybuilding and glute-focused development
Strength and posterior-chain athletes
High-end commercial gyms
Women’s training areas and glute-specialty sections
Rehab clinics requiring controlled hip isolation work
N. OH-KHR
Size: W1145 × L1554 × H1631 (mm)
OnHim Hip Adduction/Abduction Combo
Model Code: No. OH-ADDABD
Size: W750 × L1900 × H1630 (mm)
Weight Block: 112.5KG
Frame: 100 x 50 3.2T
FEATURES:
1. Effective for exercising the quadriceps (thighs), including inner and outer muscles, as a lower body weight training equipment.
2. Designed with advanced ergonomic principles to maintain precise movements and minimize strain on the joints.
Size: W750 × L1900 × H1630 (mm)
Weight Block: 112.5KG
Frame: 100 x 50 3.2T
FEATURES:
1. Effective for exercising the quadriceps (thighs), including inner and outer muscles, as a lower body weight training equipment.
2. Designed with advanced ergonomic principles to maintain precise movements and minimize strain on the joints.
OnHim Hip Abduction (Single Move) (New)
Model Code: No. OH-SMABD
Size: W685 × L1835 × H1630 (mm)
Size: W685 × L1835 × H1630 (mm)
OnHim Glute Kick-Back
Model Code: No. OH-GH
Size: W1060 × L1430 × H1630 (mm)
Weight Block: 55KG
Frame: 100 x 50 3.2T
Size: W1060 × L1430 × H1630 (mm)
Weight Block: 55KG
Frame: 100 x 50 3.2T
Torture Squat & Calf Raise
Model Code: No. NT-T-SCR
Size: W 1195 x L 1985 x H 1960
Weight Block: Use of Plates
Frame: 100 x 50 x 3T (round) / 80 x 40 x 3T (round)
FEATURES:
1. Can perform 2 exercises (squats/calf raises).
2. Ergonomically designed to allow for customized exercise to suit the user’s height.
3. Safe exercise possible with stopper device.
4. Stable and efficient exercise is possible by adjusting the footrest angle.
Size: W 1195 x L 1985 x H 1960
Weight Block: Use of Plates
Frame: 100 x 50 x 3T (round) / 80 x 40 x 3T (round)
FEATURES:
1. Can perform 2 exercises (squats/calf raises).
2. Ergonomically designed to allow for customized exercise to suit the user’s height.
3. Safe exercise possible with stopper device.
4. Stable and efficient exercise is possible by adjusting the footrest angle.
Torture Power Leg Press (Thomson)
Model Code: No. T-PLP
Size: W 800 x L 1020 x H 940
Frame: 100 x 50 x 3.2T (square)
Features:
1. An auxiliary exercise device that allows you to perform arm curl exercises using a barbell or dumbbell.
2. The adjustable seat and arm pad comfortably secure the chest during exercise, and you can exercise freely using the EZ Bar, etc.
3. The angle of movement can be changed depending on the angle difference between the left and right sides of the pad.
Size: W 800 x L 1020 x H 940
Frame: 100 x 50 x 3.2T (square)
Features:
1. An auxiliary exercise device that allows you to perform arm curl exercises using a barbell or dumbbell.
2. The adjustable seat and arm pad comfortably secure the chest during exercise, and you can exercise freely using the EZ Bar, etc.
3. The angle of movement can be changed depending on the angle difference between the left and right sides of the pad.
Torture Leg Extension
Model Code: No. T-LE
Size: W 1430 x L 1600 x H 1090
Weight Block: Use of Plates
Frame: 100 x 50 x 3T (round) / 80 x 40 x 3T (round)
FEATURES:
1. Effective for developing quadriceps as a lower body exercise machine.
2. Stable and focused exercise is possible by applying a fixed belt.
3. The backrest angle can be adjusted, and the distance between the operating part and the body can be adjusted to enable effective exercise.
4. The angle of the operating part can be adjusted, allowing muscle load to be applied to various areas
Size: W 1430 x L 1600 x H 1090
Weight Block: Use of Plates
Frame: 100 x 50 x 3T (round) / 80 x 40 x 3T (round)
FEATURES:
1. Effective for developing quadriceps as a lower body exercise machine.
2. Stable and focused exercise is possible by applying a fixed belt.
3. The backrest angle can be adjusted, and the distance between the operating part and the body can be adjusted to enable effective exercise.
4. The angle of the operating part can be adjusted, allowing muscle load to be applied to various areas
Torture Leg Curl
Model Code: No. T-LC
Size: W 1790 x L 1330 x H 830
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. Weight Training lower body exercise basic equipment, effective for the development of the hamstrings.
2. Stable posture during exercise enabled by the installation of handles.
3. Ergonomically designed to prevent strain on the joints and ensure proper load distribution.
Size: W 1790 x L 1330 x H 830
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. Weight Training lower body exercise basic equipment, effective for the development of the hamstrings.
2. Stable posture during exercise enabled by the installation of handles.
3. Ergonomically designed to prevent strain on the joints and ensure proper load distribution.
Torture Kneeling Leg Curl
Model Code: No. T-KLC
Size: W 1340 x L 1280 x H 1330
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. Designed to be used with auxiliary equipment as a basic tool for weight training, allowing for a wide range of exercises.
2. Equipped with an automatic safety pin.
3. Designed with a counterbalance to make it easy for beginners to perform exercises.
Size: W 1340 x L 1280 x H 1330
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. Designed to be used with auxiliary equipment as a basic tool for weight training, allowing for a wide range of exercises.
2. Equipped with an automatic safety pin.
3. Designed with a counterbalance to make it easy for beginners to perform exercises.
Torture Hip Thrust
Model Code: No. T-HTT
Size: W 1400 x L 1850 x H 1055
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. Basic equipment for lower body weight training, effective for the development of the hamstrings.
2. Stable posture during exercise enabled by the installation of handles.
3. Ergonomically designed to avoid strain on the joints and ensure proper load distribution.
Size: W 1400 x L 1850 x H 1055
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. Basic equipment for lower body weight training, effective for the development of the hamstrings.
2. Stable posture during exercise enabled by the installation of handles.
3. Ergonomically designed to avoid strain on the joints and ensure proper load distribution.
Torture Hip Thrust (Rotary) (New)
The Most Advanced Glute-Building System Ever Engineered. Full Support. Full Rotation. Full Contraction.
The Torture Rotary Hip Thrust is a breakthrough innovation in glute training—combining industry-first rotary footplates, complete spinal and pelvic support, multi-axis adjustments, and secure pelvic stabilization into a single, premium-strength machine. Every detail of its engineering solves the common limitations of existing hip thrusts: unstable benches, poor pelvic alignment, limited contraction, lower-back strain, and awkward setup. This system creates a mechanically perfect, perfectly repeatable hip thrust for every body type.
Designed for elite physique development, glute hypertrophy, and safe progressive overload, the Rotary Hip Thrust delivers the deepest stretch, strongest peak contraction, and the most ergonomic hip extension path available in commercial equipment.
Key Features
Revolutionary Rotary Footplate System (Industry First)
The defining feature of this machine is its synchronized rotating footplates, engineered to rotate outward as you rise into the hip-thrust’s contracted position.
At the bottom (stretched position):
Feet remain in a neutral alignment
Glutes and hamstrings experience clean, loaded hip flexion
At the top (contracted position):
Footplates rotate outward
This induces natural femoral external rotation
Maximizes peak glute contraction
Removes joint strain and compensatory lower-back extension
This rotary pathway is biomechanically ideal for glute max engagement and has no true equivalent in today’s commercial hip thrust machines.
Full-Length Back & Pelvic Support (Eliminates Lower Back Strain)
Unlike traditional benches or split pads, this system provides:
Full lumbar support
Full pelvic support
Full upper glute support
The entire spine and pelvis remain stable and neutral through the motion, dramatically reducing lower-back involvement and allowing the glutes to perform the work as intended.
When paired with the included seatbelt, users stay locked into the bench with no sliding, arching, or hyperextension.
Exclusive Multi-Position Pelvic Seatbelt System (3 Adjustments)
No other hip thrust on the market offers a 3-position adjustable padded belt.
This system adjusts for:
Torso length
Pelvic height
Hip width
Belt placement angle
It accommodates every body type and ensures your pelvis stays down and locked, allowing continuous tension on the glutes without shifting or loss of leverage.
A built-in belt holder keeps the machine tidy between uses.
Adjustable Handle System (5 Grip Positions)
Dual handles slide across five micro-indexed positions, allowing users to find:
A natural wrist position
The ideal arm distance
Maximum bracing strength
This customization supports heavier lifting and prevents shoulder fatigue during long sets.
Premium Foot Platforms with Bilateral & Unilateral Options
The oversized perforated footplates provide:
Superior grip for heavy loading
Secure plant through the full concentric and eccentric phases
Adjustable width and angle bias
A secondary platform for unilateral hip thrusts to correct imbalances and enhance glute isolation
This makes the machine highly versatile for athletes prioritizing symmetry and corrective strength.
Headrest Macro + Micro Adjustments (5 + 4 Positions)
For total cervical and thoracic comfort:
5 macro height positions allow rough alignment
4 micro angle options provide precision head/neck placement
The result is a neutral spine position with zero neck strain throughout the movement—something traditional hip thrust setups rarely offer.
Smooth, Natural Range with Rotary Guidance
The machine maintains perfect hip extension mechanics with a:
Durable rotary linkage
Fluid resistance path
High-strength pivot architecture
This ensures:
Deep stretch without pelvis shifting
Powerful contraction without lumbar extension
Smooth transitions from bottom to top
The movement feels natural, controlled, and highly glute-dominant.
Safety Unrack/Rerack System
A heavy-duty, easy-to-reach safety bar allows users to:
Enter and exit the machine safely
Rack and unrack even under heavy load
Maintain confidence when pushing high-intensity sets
This makes it ideal for commercial gyms where safety and self-sufficiency matter.
Why Athletes Choose This Machine
The strongest peak glute contraction available on a hip thrust
Zero lower-back irritation due to full spine support
Rotary footplates that improve biomechanics and muscle engagement
Adjustable belt system keeps the pelvis locked down for pure glute loading
Precise, customizable setup for every body type
Ability to perform both bilateral and unilateral work seamlessly
Why Gym Owners Love It
Truly unique innovation—differentiates your gym from competitors
Extremely safe and intuitive for beginners and advanced athletes
High-end engineering with long-term durability
Clean, organized look thanks to built-in belt storage
Appeals strongly to glute-focused training, one of the most in-demand fitness markets
A New Standard for Glute Training
The Torture Rotary Hip Thrust represents a complete reinvention of the hip thrust movement, offering unmatched biomechanics, unmatched personalization, and unmatched support. For athletes seeking maximum glute development—and for gyms wanting a standout showpiece—this machine is in a category of its own.
No. T-(R)-HTT
Size: W1625 × L1955 × H1090 (mm)
The Torture Rotary Hip Thrust is a breakthrough innovation in glute training—combining industry-first rotary footplates, complete spinal and pelvic support, multi-axis adjustments, and secure pelvic stabilization into a single, premium-strength machine. Every detail of its engineering solves the common limitations of existing hip thrusts: unstable benches, poor pelvic alignment, limited contraction, lower-back strain, and awkward setup. This system creates a mechanically perfect, perfectly repeatable hip thrust for every body type.
Designed for elite physique development, glute hypertrophy, and safe progressive overload, the Rotary Hip Thrust delivers the deepest stretch, strongest peak contraction, and the most ergonomic hip extension path available in commercial equipment.
Key Features
Revolutionary Rotary Footplate System (Industry First)
The defining feature of this machine is its synchronized rotating footplates, engineered to rotate outward as you rise into the hip-thrust’s contracted position.
At the bottom (stretched position):
Feet remain in a neutral alignment
Glutes and hamstrings experience clean, loaded hip flexion
At the top (contracted position):
Footplates rotate outward
This induces natural femoral external rotation
Maximizes peak glute contraction
Removes joint strain and compensatory lower-back extension
This rotary pathway is biomechanically ideal for glute max engagement and has no true equivalent in today’s commercial hip thrust machines.
Full-Length Back & Pelvic Support (Eliminates Lower Back Strain)
Unlike traditional benches or split pads, this system provides:
Full lumbar support
Full pelvic support
Full upper glute support
The entire spine and pelvis remain stable and neutral through the motion, dramatically reducing lower-back involvement and allowing the glutes to perform the work as intended.
When paired with the included seatbelt, users stay locked into the bench with no sliding, arching, or hyperextension.
Exclusive Multi-Position Pelvic Seatbelt System (3 Adjustments)
No other hip thrust on the market offers a 3-position adjustable padded belt.
This system adjusts for:
Torso length
Pelvic height
Hip width
Belt placement angle
It accommodates every body type and ensures your pelvis stays down and locked, allowing continuous tension on the glutes without shifting or loss of leverage.
A built-in belt holder keeps the machine tidy between uses.
Adjustable Handle System (5 Grip Positions)
Dual handles slide across five micro-indexed positions, allowing users to find:
A natural wrist position
The ideal arm distance
Maximum bracing strength
This customization supports heavier lifting and prevents shoulder fatigue during long sets.
Premium Foot Platforms with Bilateral & Unilateral Options
The oversized perforated footplates provide:
Superior grip for heavy loading
Secure plant through the full concentric and eccentric phases
Adjustable width and angle bias
A secondary platform for unilateral hip thrusts to correct imbalances and enhance glute isolation
This makes the machine highly versatile for athletes prioritizing symmetry and corrective strength.
Headrest Macro + Micro Adjustments (5 + 4 Positions)
For total cervical and thoracic comfort:
5 macro height positions allow rough alignment
4 micro angle options provide precision head/neck placement
The result is a neutral spine position with zero neck strain throughout the movement—something traditional hip thrust setups rarely offer.
Smooth, Natural Range with Rotary Guidance
The machine maintains perfect hip extension mechanics with a:
Durable rotary linkage
Fluid resistance path
High-strength pivot architecture
This ensures:
Deep stretch without pelvis shifting
Powerful contraction without lumbar extension
Smooth transitions from bottom to top
The movement feels natural, controlled, and highly glute-dominant.
Safety Unrack/Rerack System
A heavy-duty, easy-to-reach safety bar allows users to:
Enter and exit the machine safely
Rack and unrack even under heavy load
Maintain confidence when pushing high-intensity sets
This makes it ideal for commercial gyms where safety and self-sufficiency matter.
Why Athletes Choose This Machine
The strongest peak glute contraction available on a hip thrust
Zero lower-back irritation due to full spine support
Rotary footplates that improve biomechanics and muscle engagement
Adjustable belt system keeps the pelvis locked down for pure glute loading
Precise, customizable setup for every body type
Ability to perform both bilateral and unilateral work seamlessly
Why Gym Owners Love It
Truly unique innovation—differentiates your gym from competitors
Extremely safe and intuitive for beginners and advanced athletes
High-end engineering with long-term durability
Clean, organized look thanks to built-in belt storage
Appeals strongly to glute-focused training, one of the most in-demand fitness markets
A New Standard for Glute Training
The Torture Rotary Hip Thrust represents a complete reinvention of the hip thrust movement, offering unmatched biomechanics, unmatched personalization, and unmatched support. For athletes seeking maximum glute development—and for gyms wanting a standout showpiece—this machine is in a category of its own.
No. T-(R)-HTT
Size: W1625 × L1955 × H1090 (mm)
Torture Hack Squat Premium (Thomson) (New)
No. T-(P)-HS
Size: W1770 × L2350 × H1560 (mm)
Size: W1770 × L2350 × H1560 (mm)
Torture Hack Squat (Thomson)
Model Code: No. NT-T-HS
Size: W 1500 x L 2290 x H 1490
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. The most powerful comprehensive lower body workout equipment in weight training.
2. Handlebars installed on both sides of the seat allow for stable posture during exercise.
3. One-touch operation safety stopper.
Size: W 1500 x L 2290 x H 1490
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. The most powerful comprehensive lower body workout equipment in weight training.
2. Handlebars installed on both sides of the seat allow for stable posture during exercise.
3. One-touch operation safety stopper.
Torture Hack Press (Thomson)
Model Code: No. T-HP
Size: W 1805 x L 1150 x H 1015
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. Handles are installed on both sides of the seat for a stable workout posture.
2. One-touch operation for the safety stopper.
3. Effective lower body equipment for developing the quadriceps and gluteal muscles.
Size: W 1805 x L 1150 x H 1015
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. Handles are installed on both sides of the seat for a stable workout posture.
2. One-touch operation for the safety stopper.
3. Effective lower body equipment for developing the quadriceps and gluteal muscles.
Torture Glute Kick-Back
Model Code: No. T-GH
Size: W 1300 x L 1570 x H 1730
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. A hip exercise machine effective for glute workouts.
2. Maximizes effectiveness by exercising with one foot or both feet.
Size: W 1300 x L 1570 x H 1730
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. A hip exercise machine effective for glute workouts.
2. Maximizes effectiveness by exercising with one foot or both feet.
Torture Belt Squat (New)
The Belt Squat That Scales With You — From First Rep to Elite-Level Load.
The Newtech Torture Belt Squat is not just a belt squat — it’s a complete lower-body and bodyweight powerhouse engineered to eliminate spinal loading, maximize quad and glute recruitment, and remain usable for every athlete at every strength level. From rehab and first-time lifters to elite powerlifters and Olympia-level competitors, this machine adapts precisely to the user.
At its core is a precision-engineered belt squat system paired with an adjustable foot platform, multi-position loading pegs, integrated dip functionality, and a counterweight system that makes the machine scalable in both directions — heavier or lighter than bodyweight.
Adjustable Foot Platform (3 Angles)
The oversized, non-slip steel platform adjusts into three distinct positions, allowing athletes to fine-tune quad bias, ankle comfort, and squat mechanics:
• -4° Decline — aggressive quad emphasis and deeper knee flexion
• 180° Flat — balanced, natural squat mechanics
• +4° Incline — increased posterior chain engagement and ankle relief
A built-in stepper allows athletes to mount and dismount the platform safely
Multi-Point Load Placement (4 Steel Hook Positions)
The Torture Belt Squat features four heavy-duty steel hook positions, allowing lifters to alter how resistance is applied relative to the belt or attachment:
• Change tension angle
• Modify resistance curve
• Customize difficulty at different portions of the movement
Top vs. Bottom Peg Loading:
Lower peg loading generally makes the bottom position easier while increasing difficulty toward lockout (matching the natural resistance curve of the quadriceps)
Upper peg loading increases challenge out of the hole and feels lighter at the top (for athletes looking to overload the stretched position)
This allows athletes to bias weak points, overload specific ranges, or simply match their preferred squat feel.
Massive Plate Capacity
This machine is built to handle extreme loading without compromise:
• 4 total weight pegs
• Each peg comfortably holds 11 plates
• 44 plates total capacity
• Nearly 2,000 lbs of load potential
If someone can squat that — the machine is ready.
Counterweight System (Game-Changing Accessibility)
Unlike traditional belt squats that are “heavy by default,” the Torture Belt Squat includes a rear counterweight system:
• 2 rear pegs
• Load up to 10 plates total
• Reduces effective resistance dramatically
This allows:
• Beginners to squat comfortably
• Smaller athletes to use the machine
• Advanced lifters to fine-tune starting resistance
• Elite athletes to progressively overload forever
The same system applies to dips, making even extremely heavy dip mechanics adjustable down to near bodyweight — or lighter.
Integrated Dips — Done Right
This isn’t an afterthought dip station. It’s fully engineered:
• Hand bars drop securely into place for dips
• Bars can also be pushed out of the way when not in use
• Additional dip stepper flips down or locks up on both sides
• Perform bodyweight or weighted dips with constant, adjustable resistance
Even unloaded, dips feel substantial — and with the counterweight system, the machine becomes accessible to all users while still allowing elite progression.
Grip Variety & Control
Athletes get 8 total grip options for stability and variation:
• 3 sets of overhand grips at varying heights
• 1 neutral grip, also usable at multiple heights
This allows comfortable positioning for squats, dips, bracing, and attachment-based movements.
Beyond Squats & Dips
The Torture Belt Squat is extremely versatile:
• Deep, quad-biased ass-to-grass belt squats
• Weighted or counterweighted dips
• RDLs and hamstring work using bar or attachment
• Attachment-based posterior chain movements
A safety bar allows secure unracking and reracking every time.
Built for Real Gyms
• Heavy-gauge steel construction
• Clean, industrial finish
• Convenient storage hooks on both sides for belts and attachments
• Designed for commercial abuse without sacrificing user experience
Bottom Line
The Newtech Torture Belt Squat is not a niche machine. It’s a lifetime progression tool — equally effective for beginners learning movement patterns and elite athletes chasing absolute load.
One machine.
Unlimited scalability.
Zero spinal compromise.
No. NT-T-BSQ
Size: W1721 × L2447 × H1815 (mm)
The Newtech Torture Belt Squat is not just a belt squat — it’s a complete lower-body and bodyweight powerhouse engineered to eliminate spinal loading, maximize quad and glute recruitment, and remain usable for every athlete at every strength level. From rehab and first-time lifters to elite powerlifters and Olympia-level competitors, this machine adapts precisely to the user.
At its core is a precision-engineered belt squat system paired with an adjustable foot platform, multi-position loading pegs, integrated dip functionality, and a counterweight system that makes the machine scalable in both directions — heavier or lighter than bodyweight.
Adjustable Foot Platform (3 Angles)
The oversized, non-slip steel platform adjusts into three distinct positions, allowing athletes to fine-tune quad bias, ankle comfort, and squat mechanics:
• -4° Decline — aggressive quad emphasis and deeper knee flexion
• 180° Flat — balanced, natural squat mechanics
• +4° Incline — increased posterior chain engagement and ankle relief
A built-in stepper allows athletes to mount and dismount the platform safely
Multi-Point Load Placement (4 Steel Hook Positions)
The Torture Belt Squat features four heavy-duty steel hook positions, allowing lifters to alter how resistance is applied relative to the belt or attachment:
• Change tension angle
• Modify resistance curve
• Customize difficulty at different portions of the movement
Top vs. Bottom Peg Loading:
Lower peg loading generally makes the bottom position easier while increasing difficulty toward lockout (matching the natural resistance curve of the quadriceps)
Upper peg loading increases challenge out of the hole and feels lighter at the top (for athletes looking to overload the stretched position)
This allows athletes to bias weak points, overload specific ranges, or simply match their preferred squat feel.
Massive Plate Capacity
This machine is built to handle extreme loading without compromise:
• 4 total weight pegs
• Each peg comfortably holds 11 plates
• 44 plates total capacity
• Nearly 2,000 lbs of load potential
If someone can squat that — the machine is ready.
Counterweight System (Game-Changing Accessibility)
Unlike traditional belt squats that are “heavy by default,” the Torture Belt Squat includes a rear counterweight system:
• 2 rear pegs
• Load up to 10 plates total
• Reduces effective resistance dramatically
This allows:
• Beginners to squat comfortably
• Smaller athletes to use the machine
• Advanced lifters to fine-tune starting resistance
• Elite athletes to progressively overload forever
The same system applies to dips, making even extremely heavy dip mechanics adjustable down to near bodyweight — or lighter.
Integrated Dips — Done Right
This isn’t an afterthought dip station. It’s fully engineered:
• Hand bars drop securely into place for dips
• Bars can also be pushed out of the way when not in use
• Additional dip stepper flips down or locks up on both sides
• Perform bodyweight or weighted dips with constant, adjustable resistance
Even unloaded, dips feel substantial — and with the counterweight system, the machine becomes accessible to all users while still allowing elite progression.
Grip Variety & Control
Athletes get 8 total grip options for stability and variation:
• 3 sets of overhand grips at varying heights
• 1 neutral grip, also usable at multiple heights
This allows comfortable positioning for squats, dips, bracing, and attachment-based movements.
Beyond Squats & Dips
The Torture Belt Squat is extremely versatile:
• Deep, quad-biased ass-to-grass belt squats
• Weighted or counterweighted dips
• RDLs and hamstring work using bar or attachment
• Attachment-based posterior chain movements
A safety bar allows secure unracking and reracking every time.
Built for Real Gyms
• Heavy-gauge steel construction
• Clean, industrial finish
• Convenient storage hooks on both sides for belts and attachments
• Designed for commercial abuse without sacrificing user experience
Bottom Line
The Newtech Torture Belt Squat is not a niche machine. It’s a lifetime progression tool — equally effective for beginners learning movement patterns and elite athletes chasing absolute load.
One machine.
Unlimited scalability.
Zero spinal compromise.
No. NT-T-BSQ
Size: W1721 × L2447 × H1815 (mm)
Torture Drop Squat
Model Code: No. T-DS
Size: W 1500 x L 1750 x H 1770
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. Adjustable footplate angle enables stable and efficient workouts.
2. The stopper mechanism ensures safe and stable exercise.
3. Ergonomic design allows for workouts tailored to the user's body.
Size: W 1500 x L 1750 x H 1770
Weight Block: Use of Plates
Frame: 100 x 50 x 3T / 80 x 40 x 3T
FEATURES:
1. Adjustable footplate angle enables stable and efficient workouts.
2. The stopper mechanism ensures safe and stable exercise.
3. Ergonomic design allows for workouts tailored to the user's body.
Torture Power Leg Press Premium (Thomson) (New)
No. T-(P)-PLP
Size: W1190 × L1870 × H1620 (mm)
Size: W1190 × L1870 × H1620 (mm)
bottom of page